PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W88676
W88676 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CUSHION, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: OBLONG, surface_treatment: CADMIUM BAND, material_thickness: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-985-6690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W88676
NSN: 5340-00-985-6690
FSC: 5340
CAGE: 33968 — CLARK EQUIPMENT CO DIV DOOSAN INFRACORE PORTABLE POWER (USA)
SPECIFICATIONS
materialRUBBER CUSHION
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeOBLONG
surface_treatmentCADMIUM BAND
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.656 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.390 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.890 INCHES NOMINAL IN
NSN5340-00-985-6690
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W88676 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.390 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.656 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.390 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.656 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
MATERIALSTEEL BAND
MATERIALRUBBER CUSHION
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.890 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
23681Upgraded Successor
successor cross-reference
successor
6510NCM116270Upgraded Successor
successor cross-reference
successor
18194Upgraded Successor
successor cross-reference
successor
FC1396Interchangeable
interchangeable cross-reference
interchangeable
1CC61Interchangeable
interchangeable cross-reference
interchangeable
23681REVCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W88676?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W88676?
W88676 is a CLAMP,LOOP.
What parts can replace W88676?
There are 13 known substitutes for W88676: 23681, 6510NCM116270, 18194 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W88676?
W88676 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-985-6690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W88676

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026