PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FC1396
FC1396 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 3.656 INCHES NOMINAL IN, bolt_circle_diameter: 3.500 INCHES NOMINAL IN, outside_corner_radius: 0.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.020 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-7051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FC1396
NSN: 5330-00-361-7051
FSC: 5330
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length3.656 INCHES NOMINAL IN
bolt_circle_diameter3.500 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
cross-sectional_thickness0.020 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.562 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-361-7051
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FC1396 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT CIRCLE DIAMETER: 3.500 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
SIDE RADIUS FROM GASKET CENTER: 1.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.020 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
HOLE DIAMETER0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH3.656 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.500 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SIDE RADIUS FROM GASKET CENTER1.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
23681Interchangeable
interchangeable cross-reference
interchangeable
23681REVCInterchangeable
interchangeable cross-reference
interchangeable
ABT7757Interchangeable
interchangeable cross-reference
interchangeable
7757Interchangeable
interchangeable cross-reference
interchangeable
CV177820Interchangeable
interchangeable cross-reference
interchangeable
900729-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FC1396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FC1396?
FC1396 is a GASKET.
What parts can replace FC1396?
There are 10 known substitutes for FC1396: 23681, 23681REVC, ABT7757 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FC1396?
FC1396 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-7051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FC1396

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026