PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V3E10086 ITEM 31CP
V3E10086 ITEM 31CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 1.096 INCHES MINIMUM AND 1.152 INCHES MAXIMUM IN, center_hole_diameter: 0.956 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, specification/standard_data: 96906-MS28774L AMENDMENT 1/INACTIVE/ GOVERNMENT STANDARD, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-528-4373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3E10086 ITEM 31CP
NSN: 5330-01-528-4373
FSC: 5330
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter1.096 INCHES MINIMUM AND 1.152 INCHES MAXIMUM IN
center_hole_diameter0.956 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
specification/standard_data96906-MS28774L AMENDMENT 1/INACTIVE/ GOVERNMENT STANDARD
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationAS8791/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-528-4373
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3E10086 ITEM 31CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
PERIPHERAL DIAMETER: 1.096 INCHES MINIMUM AND 1.152 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.956 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 96906-MS28774L AMENDMENT 1/INACTIVE/ GOVERNMENT STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: AS8791/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
PERIPHERAL DIAMETER1.096 INCHES MINIMUM AND 1.152 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.956 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA96906-MS28774L AMENDMENT 1/INACTIVE/ GOVERNMENT STANDARD
MATERIAL DOCUMENT AND CLASSIFICATIONAS8791/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
V3D10043PC16Interchangeable
interchangeable cross-reference
interchangeable
S1E10069 ITEM 48Interchangeable
interchangeable cross-reference
interchangeable
V3D10119 ITEM 36Interchangeable
interchangeable cross-reference
interchangeable
M8791/1-119Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS8791/1Interchangeable
interchangeable cross-reference
interchangeable
V3E10086 ITEM 29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3E10086 ITEM 31CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3E10086 ITEM 31CP?
V3E10086 ITEM 31CP is a RETAINER,PACKING.
What parts can replace V3E10086 ITEM 31CP?
There are 10 known substitutes for V3E10086 ITEM 31CP: V3D10043PC16, S1E10069 ITEM 48, V3D10119 ITEM 36 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3E10086 ITEM 31CP?
V3E10086 ITEM 31CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-528-4373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3E10086 ITEM 31CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026