PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V3D10119 ITEM 36
V3D10119 ITEM 36 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.120 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN, center_hole_diameter: 0.950 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3D10119 ITEM 36
NSN: 5330-01-020-9507
FSC: 5330
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.120 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
center_hole_diameter0.950 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-020-9507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3D10119 ITEM 36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CENTER HOLE DIAMETER: 0.950 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.120 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
JOINT TYPESCARF-PERIPHERAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CENTER HOLE DIAMETER0.950 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.120 INCHES MINIMUM AND 1.126 INCHES MAXIMUM IN
CUT TYPEDIAGONAL OVERALL
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
S1E10041PC48Interchangeable
interchangeable cross-reference
interchangeable
S1E10037PC47Interchangeable
interchangeable cross-reference
interchangeable
54-94-7119Interchangeable
interchangeable cross-reference
interchangeable
M8791/1-119Interchangeable
interchangeable cross-reference
interchangeable
V3E10086 ITEM 31CPInterchangeable
interchangeable cross-reference
interchangeable
V3E10086 ITEM 29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3D10119 ITEM 36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3D10119 ITEM 36?
V3D10119 ITEM 36 is a RETAINER,PACKING.
What parts can replace V3D10119 ITEM 36?
There are 16 known substitutes for V3D10119 ITEM 36: S1E10041PC48, S1E10037PC47, 54-94-7119 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3D10119 ITEM 36?
V3D10119 ITEM 36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3D10119 ITEM 36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026