PartsTable
Technical Data Sheet
PartsTable / O-RING / V3D10075PC42CP
V3D10075PC42CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, peripheral_diameter: 0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN, center_hole_diameter: 0.632 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-3688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3D10075PC42CP
NSN: 5331-00-054-3688
FSC: 5331 — O-RING
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
peripheral_diameter0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
center_hole_diameter0.632 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-054-3688
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3D10075PC42CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
180-111Interchangeable
interchangeable cross-reference
interchangeable
A180-111Interchangeable
interchangeable cross-reference
interchangeable
V3D10075PC42CPInterchangeable
interchangeable cross-reference
interchangeable
V3D10108 ITEM 42Interchangeable
interchangeable cross-reference
interchangeable
V3C10175 ITEM 10CPInterchangeable
interchangeable cross-reference
interchangeable
A180-111MILP25732CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3D10075PC42CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3D10075PC42CP?
V3D10075PC42CP is a RETAINER,PACKING.
What parts can replace V3D10075PC42CP?
There are 14 known substitutes for V3D10075PC42CP: 180-111, A180-111, V3D10075PC42CP and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3D10075PC42CP?
V3D10075PC42CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-3688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3D10075PC42CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026