PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V3C10175 ITEM 10CP
V3C10175 ITEM 10CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN, center_hole_diameter: 0.632 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3C10175 ITEM 10CP
NSN: 5330-01-020-9519
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
center_hole_diameter0.632 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-020-9519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3C10175 ITEM 10CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
CUT TYPE: DIAGONAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
CUT TYPEDIAGONAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CENTER HOLE DIAMETER0.632 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
V3D10108 ITEM 31CPInterchangeable
interchangeable cross-reference
interchangeable
V3D10108 ITEM 31Interchangeable
interchangeable cross-reference
interchangeable
A180-111Interchangeable
interchangeable cross-reference
interchangeable
V3066Interchangeable
interchangeable cross-reference
interchangeable
MS28774-114ESInterchangeable
interchangeable cross-reference
interchangeable
V3531PC25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3C10175 ITEM 10CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3C10175 ITEM 10CP?
V3C10175 ITEM 10CP is a RETAINER,PACKING.
What parts can replace V3C10175 ITEM 10CP?
There are 15 known substitutes for V3C10175 ITEM 10CP: V3D10108 ITEM 31CP, V3D10108 ITEM 31, A180-111 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3C10175 ITEM 10CP?
V3C10175 ITEM 10CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-020-9519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3C10175 ITEM 10CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026