PartsTable
Technical Data Sheet
Download PDF

V2391X — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V2391X: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: STEEL COMP 1010, outside_diameter: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, style_designator: CUP, material_thickness: 0.0299 INCHES NOMINAL IN, material_document_and_classification: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-700-1521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V2391X
NSN: 5340-00-700-1521
FSC: 5340 — Hardware, Commercial
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
materialSTEEL COMP 1010
outside_diameter0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
style_designatorCUP
material_thickness0.0299 INCHES NOMINAL IN
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-700-1521
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V2391X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.0299 INCHES NOMINAL IN
•
HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.0299 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
SUBSTITUTES & CROSS-REFERENCES 6
365892001Reference document
Same NSN cross-reference
Reference document — Secondary reference
1929Reference document
Same NSN cross-reference
Reference document — Secondary reference
BB22184Reference document
Same NSN cross-reference
Reference document — Secondary reference
2B1929Reference document
Same NSN cross-reference
Reference document — Secondary reference
92171Reference document
Same NSN cross-reference
Reference document — Secondary reference
231080Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy V2391X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V2391X?
V2391X is a PLUG,EXPANSION.
What parts can replace V2391X?
There are 6 known substitutes for V2391X: 365892001, 1929, BB22184 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V2391X?
V2391X is cataloged in the U.S. Government catalog under NSN 5340-00-700-1521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V2391X