PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 92171
92171 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONDUIT,METAL,FLEXIBLE is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: STEEL COMP 1010, outside_diameter: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, special_features: NAVAIR PUBLICATION 19-15AA-8, FIGURE 11, INDEX 102, style_designator: CUP, material_thickness: 0.0299 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-700-1521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
92171
NSN: 5340-00-700-1521
FSC: 5340
CAGE: 89109 — GRAHAM PAIGE CORP (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
materialSTEEL COMP 1010
outside_diameter0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
special_featuresNAVAIR PUBLICATION 19-15AA-8, FIGURE 11, INDEX 102
style_designatorCUP
material_thickness0.0299 INCHES NOMINAL IN
end_item_identificationT45 AIRCRAFT (CONTRACT SUPPORTED)
criticality_code_justificationAGAV
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-700-1521
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 92171 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: CUP
•
HEIGHT: 0.250 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1010
•
MATERIAL THICKNESS: 0.0299 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATORCUP
HEIGHT0.250 INCHES NOMINAL IN
OUTSIDE DIAMETER0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010
MATERIAL THICKNESS0.0299 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1929Interchangeable
interchangeable cross-reference
interchangeable
SCD4166-1Interchangeable
interchangeable cross-reference
interchangeable
1621Interchangeable
interchangeable cross-reference
interchangeable
A-200DSInterchangeable
interchangeable cross-reference
interchangeable
KAPPA-B-IV-M2Interchangeable
interchangeable cross-reference
interchangeable
96257Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 92171?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 92171?
92171 is a CONDUIT,METAL,FLEXIBLE.
What parts can replace 92171?
There are 15 known substitutes for 92171: 1929, SCD4166-1, 1621 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 92171?
92171 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-700-1521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 92171

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026