PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V11363809
V11363809 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, outside_diameter: 0.253 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: NICKEL OVERALL, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0794, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V11363809
NSN: 5310-00-209-0794
FSC: 5310
CAGE: 99872 — ENTRON INDUSTRIES LIMITED PARTNERSHIP DBA ENTRON INDUSTRIES PROPERTY DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
outside_diameter0.253 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentNICKEL OVERALL
material_thickness0.031 INCHES NOMINAL IN
NSN5310-00-209-0794
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: V11363809 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.253 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT: NICKEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER0.253 INCHES NOMINAL IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTNICKEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2W1-17-14-32Interchangeable
interchangeable cross-reference
interchangeable
ASAB27-1-1950MEDIUMSERIESInterchangeable
interchangeable cross-reference
interchangeable
5310PL1390001Interchangeable
interchangeable cross-reference
interchangeable
727059Interchangeable
interchangeable cross-reference
interchangeable
107-169Interchangeable
interchangeable cross-reference
interchangeable
304-6000-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy V11363809?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V11363809?
V11363809 is a WASHER,LOCK.
What parts can replace V11363809?
There are 15 known substitutes for V11363809: 2W1-17-14-32, ASAB27-1-1950MEDIUMSERIES, 5310PL1390001 and 12 more. Substitute compatibility should be verified for your specific system.
Is V11363809 still available?
V11363809 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V11363809

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026