PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2W1-17-14-32
2W1-17-14-32 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN, overall_diameter: 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0810, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2W1-17-14-32
NSN: 5310-00-209-0810
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
overall_diameter0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
specification/standard_data43999-2W1 MANUFACTURERS STANDARD
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-209-0810
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2W1-17-14-32 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT: NICKEL OVERALL
•
OUTSIDE DIAMETER: 0.296 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTNICKEL OVERALL
OUTSIDE DIAMETER0.296 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
V11363809Interchangeable
interchangeable cross-reference
interchangeable
ASAB27-1-1950MEDIUMSERIESInterchangeable
interchangeable cross-reference
interchangeable
93620-157Interchangeable
interchangeable cross-reference
interchangeable
727059Interchangeable
interchangeable cross-reference
interchangeable
MHLS3MSInterchangeable
interchangeable cross-reference
interchangeable
9167216Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2W1-17-14-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2W1-17-14-32?
2W1-17-14-32 is a WASHER,FLAT.
What parts can replace 2W1-17-14-32?
There are 16 known substitutes for 2W1-17-14-32: V11363809, ASAB27-1-1950MEDIUMSERIES, 93620-157 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2W1-17-14-32?
2W1-17-14-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2W1-17-14-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026