V0835 2-116 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

V0835 2-116: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN, center_hole_diameter: 0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-197-0895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

V0835 2-116

NSN: 5331-01-197-0895
FSC: 5331 — O-ring
CAGE: 01697 — FB WRIGHT CO (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
center_hole_diameter	0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-01-197-0895

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 7

2-116 V0835-75Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

M83485/1-116Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

556-5749829-011Reference document

Same NSN cross-reference

Reference document — Secondary reference

850000101-R11-116Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ST1946-116Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-R-83485/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy V0835 2-116?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is V0835 2-116?

V0835 2-116 is a O-RING.

What parts can replace V0835 2-116?

There are 7 known substitutes for V0835 2-116: 2-116 V0835-75, M83485/1-116, 556-5749829-011 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for V0835 2-116?

V0835 2-116 is cataloged in the U.S. Government catalog under NSN 5331-01-197-0895. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

V0835 2-116 — O-RING

Request a Quote — V0835 2-116