MIL-R-83485/1 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MIL-R-83485/1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 2.346 INCHES MINIMUM AND 2.382 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-118-3150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-R-83485/1

NSN: 5331-01-118-3150
NIINs: 011183150, 011259041, 011268194, 011471264, 011471265, 011912522, 011912523, 011912524, 011970895, 011992296, 012012266, 012197677, 012503312, 012977195, 013179968, 013889201, 013889207, 013889212, 013889422, 014115876, 014115877, 014514079, 014575110, 014575114, 014670669, 014670678, 014801778, 015003125, 015831517
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	2.346 INCHES MINIMUM AND 2.382 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-118-3150

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 120 MAXIMUM

•

CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	120 MAXIMUM
CENTER HOLE DIAMETER	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 8

850000100-R11-010Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS-R-83485/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

10117159Reference document

Same NSN cross-reference

Reference document — Informative reference only

M83485/1-010Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-010V835-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

V0835 2-010Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MIL-R-83485/1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-R-83485/1?

MIL-R-83485/1 is a O-RING.

What parts can replace MIL-R-83485/1?

There are 8 known substitutes for MIL-R-83485/1: 850000100-R11-010, AMS-R-83485/1, 10117159 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-R-83485/1?

MIL-R-83485/1 is cataloged in the U.S. Government catalog under NSN 5331-01-118-3150. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-R-83485/1 — O-RING

Request a Quote — MIL-R-83485/1