PartsTable
Technical Data Sheet
PartsTable / O-RING / V0747 2-152
V0747 2-152 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include color: BROWN, material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, temp_rating: -5.0 CELSIUS AND 205.0 CELSIUS DEGC, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-277-6598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0747 2-152
NSN: 5331-01-277-6598
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
colorBROWN
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
temp_rating-5.0 CELSIUS AND 205.0 CELSIUS DEGC
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
special_featuresO-RING SHAPE;OPERATED BY FLUID, HIGH TEMPERATURE; REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199.
center_hole_diameter3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification2840-99-645-9394;2840-99-645-9395;2840-99-766-0507;2840-99-766-0508;MODEL RB199MK101/103/104
material_document_and_classificationAMS7280 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000/SAE J200 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-01-277-6598
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0747 2-152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
•
CENTER HOLE DIAMETER: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS7280 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000/SAE J200 ASSN STD SINGLE MATERIAL RESPONSE
•
TEMP RATING: -5.0 CELSIUS AND 205.0 CELSIUS DEGC
•
COLOR: BROWN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
CENTER HOLE DIAMETER3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS7280 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000/SAE J200 ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURESO-RING SHAPE;OPERATED BY FLUID, HIGH TEMPERATURE; REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199.
END ITEM IDENTIFICATION2840-99-645-9394;2840-99-645-9395;2840-99-766-0507;2840-99-766-0508;MODEL RB199MK101/103/104
TEMP RATING-5.0 CELSIUS AND 205.0 CELSIUS DEGC
COLORBROWN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
M83248-1-152ESInterchangeable
interchangeable cross-reference
interchangeable
2-152V1226-75Interchangeable
interchangeable cross-reference
interchangeable
S9413-152Interchangeable
interchangeable cross-reference
interchangeable
94515-2Interchangeable
interchangeable cross-reference
interchangeable
2-152V747-75Interchangeable
interchangeable cross-reference
interchangeable
072287-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V0747 2-152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0747 2-152?
V0747 2-152 is a O-RING.
What parts can replace V0747 2-152?
There are 10 known substitutes for V0747 2-152: M83248-1-152ES, 2-152V1226-75, S9413-152 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V0747 2-152?
V0747 2-152 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-277-6598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0747 2-152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026