PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-152V747-75
2-152V747-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include color: BROWN, material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, temp_rating: -5.0 CELSIUS AND 205.0 CELSIUS DEGC, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5138, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-152V747-75
NSN: 5331-00-167-5138
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
colorBROWN
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
temp_rating-5.0 CELSIUS AND 205.0 CELSIUS DEGC
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
special_featuresO-RING SHAPE;OPERATED BY FLUID, HIGH TEMPERATURE; REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199.
center_hole_diameter3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification2840-99-645-9394;2840-99-645-9395;2840-99-766-0507;2840-99-766-0508;MODEL RB199MK101/103/104
material_document_and_classificationAMS7280 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D2000/SAE J200 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-00-167-5138
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-152V747-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 3.443 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER3.443 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.213 INCHES MINIMUM AND 3.261 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
E381BPC1Interchangeable
interchangeable cross-reference
interchangeable
30136Interchangeable
interchangeable cross-reference
interchangeable
30-210Interchangeable
interchangeable cross-reference
interchangeable
MS9388-152Interchangeable
interchangeable cross-reference
interchangeable
NST-2Interchangeable
interchangeable cross-reference
interchangeable
TI070003Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-152V747-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-152V747-75?
2-152V747-75 is a O-RING.
What parts can replace 2-152V747-75?
There are 25 known substitutes for 2-152V747-75: E381BPC1, 30136, 30-210 and 22 more. Substitute compatibility should be verified for your specific system.
Is 2-152V747-75 still available?
2-152V747-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-152V747-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026