PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TYPE E
TYPE E ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWITCH,SENSITIVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 0.7682 INCHES NOMINAL IN, first_end_style: OVAL, style_designator: CENTER GROOVE, first_end_location: BOTH ENDS, intermediate_diameter: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-167-5584, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TYPE E
NSN: 5315-01-167-5584
FSC: 5315
CAGE: 83584 — DRIV-LOK INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length0.7682 INCHES NOMINAL IN
first_end_styleOVAL
style_designatorCENTER GROOVE
first_end_locationBOTH ENDS
intermediate_diameter0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
first_end_outer_radius0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
pin_small_end_diameter0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-167-5584
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TYPE E · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE DIAMETER: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: OVAL
•
MATERIAL: STEEL OVERALL
•
FIRST END OUTER RADIUS: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CENTER GROOVE
•
PIN SMALL END DIAMETER: 0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERMEDIATE DIAMETER0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLEOVAL
MATERIALSTEEL OVERALL
FIRST END OUTER RADIUS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
STYLE DESIGNATORCENTER GROOVE
OVERALL LENGTH0.7682 INCHES NOMINAL IN
PIN SMALL END DIAMETER0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
292-2082GP1Interchangeable
interchangeable cross-reference
interchangeable
55-90017-1Interchangeable
interchangeable cross-reference
interchangeable
MS29070-031Interchangeable
interchangeable cross-reference
interchangeable
W03CADMIUMPLATEDInterchangeable
interchangeable cross-reference
interchangeable
5310002939620Interchangeable
interchangeable cross-reference
interchangeable
21284Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TYPE E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TYPE E?
TYPE E is a SWITCH,SENSITIVE.
What parts can replace TYPE E?
There are 12 known substitutes for TYPE E: 292-2082GP1, 55-90017-1, MS29070-031 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TYPE E?
TYPE E is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-167-5584. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TYPE E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026