PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W03CADMIUMPLATED
W03CADMIUMPLATED ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1035 OVERALL, hole_diameter: 0.679 INCHES MINIMUM AND 0.694 INCHES MAXIMUM IN, outside_diameter: 0.938 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN, style_designator: KEY, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL, material_thickness: 0.038 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-293-9620, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W03CADMIUMPLATED
NSN: 5310-00-293-9620
FSC: 5310
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1035 OVERALL
hole_diameter0.679 INCHES MINIMUM AND 0.694 INCHES MAXIMUM IN
outside_diameter0.938 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
style_designatorKEY
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
material_thickness0.038 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
external_key_quantity11
external_prebent_key_width0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
internal_prebent_key_width0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
internal_prebent_key_length0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
overall_distance_including_keys1.328 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-293-9620
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: W03CADMIUMPLATED · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DISTANCE INCLUDING KEYS: 1.328 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
INTERNAL PREBENT KEY LENGTH: 0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: KEY
•
HOLE DIAMETER: 0.679 INCHES MINIMUM AND 0.694 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.938 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DISTANCE INCLUDING KEYS1.328 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
INTERNAL PREBENT KEY LENGTH0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
STYLE DESIGNATORKEY
HOLE DIAMETER0.679 INCHES MINIMUM AND 0.694 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER0.938 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
INTERNAL PREBENT KEY WIDTH0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
EXTERNAL PREBENT KEY WIDTH0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
D8708PC33Interchangeable
interchangeable cross-reference
interchangeable
D8960PC36Interchangeable
interchangeable cross-reference
interchangeable
D8527PC33Interchangeable
interchangeable cross-reference
interchangeable
292-2082GP1Interchangeable
interchangeable cross-reference
interchangeable
55-90017-1Interchangeable
interchangeable cross-reference
interchangeable
21284Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy W03CADMIUMPLATED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W03CADMIUMPLATED?
W03CADMIUMPLATED is a WASHER,KEY.
What parts can replace W03CADMIUMPLATED?
There are 16 known substitutes for W03CADMIUMPLATED: D8708PC33, D8960PC36, D8527PC33 and 13 more. Substitute compatibility should be verified for your specific system.
Is W03CADMIUMPLATED still available?
W03CADMIUMPLATED is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W03CADMIUMPLATED

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026