PartsTable
Technical Data Sheet
Download PDF

TPCCSL600S — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TPCCSL600S: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN, center_hole_diameter: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, elongation_percentage: 164 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-006-2382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TPCCSL600S
NSN: 5331-00-006-2382
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
center_hole_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.021 INCHES NOMINAL IN
end_item_identificationNIMITZ CLASS CVN; CVN 68 CLASS REACTOR FILL AUXILIARY SYSTEM; MINE COUNTMINE COUNTERMEASURES SUPPORT (MCS) CLASS (LPH-12)
NSN5331-00-006-2382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TPCCSL600S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.021 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.021 INCHES NOMINAL IN
OUTSIDE DIAMETER0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE164 MAXIMUM
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONNIMITZ CLASS CVN; CVN 68 CLASS REACTOR FILL AUXILIARY SYSTEM; MINE COUNTMINE COUNTERMEASURES SUPPORT (MCS) CLASS (LPH-12)
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 2
2013N-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-013-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TPCCSL600S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TPCCSL600S?
TPCCSL600S is a O-RING.
What parts can replace TPCCSL600S?
There are 2 known substitutes for TPCCSL600S: 2013N-7, 2-013-7. Substitute compatibility should be verified for your specific system.
What is the NSN for TPCCSL600S?
TPCCSL600S is cataloged in the U.S. Government catalog under NSN 5331-00-006-2382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TPCCSL600S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.