PartsTable
Technical Data Sheet
PartsTable / O-RING / 2013N-7
2013N-7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING PACKING is a the manufacturer industrial component. Key specifications include end_item_identification: MRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 1 OTHER WEAPON SYSTEM, part_name_assigned_by_controlling_agency: SEAL,RUBBER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-006-2382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2013N-7
NSN: 5331-00-006-2382
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
end_item_identificationMRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 1 OTHER WEAPON SYSTEM
part_name_assigned_by_controlling_agencySEAL,RUBBER
NSN5331-00-006-2382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2013N-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.021 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 164 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONNIMITZ CLASS CVN; CVN 68 CLASS REACTOR FILL AUXILIARY SYSTEM; MINE COUNTMINE COUNTERMEASURES SUPPORT (MCS) CLASS (LPH-12)
CROSS-SECTIONAL HEIGHT0.021 INCHES NOMINAL IN
OUTSIDE DIAMETER0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE164 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
K4551-2Interchangeable
interchangeable cross-reference
interchangeable
MILT2118Interchangeable
interchangeable cross-reference
interchangeable
20137Interchangeable
interchangeable cross-reference
interchangeable
20515REVAPC15T025Interchangeable
interchangeable cross-reference
interchangeable
20137PC15-17T024Interchangeable
interchangeable cross-reference
interchangeable
20-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2013N-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2013N-7?
2013N-7 is a RING PACKING.
What parts can replace 2013N-7?
There are 16 known substitutes for 2013N-7: K4551-2, MILT2118, 20137 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2013N-7?
2013N-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-006-2382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2013N-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026