PartsTable
Technical Data Sheet
Download PDF

TP07006SS — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

TP07006SS: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include shear_strength: 70000 SINGLE POUNDS PER SQUARE INCH, first_end_style: ROUND, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: PASSIVATE OVERALL, first_end_location: BOTH ENDS, pin_overall_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-187-3216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TP07006SS
NSN: 5315-00-187-3216
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 06840 — BENDIX CORP THE (USA)
SPECIFICATIONS
shear_strength70000 SINGLE POUNDS PER SQUARE INCH
first_end_styleROUND
hardness_rating25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentPASSIVATE OVERALL
first_end_locationBOTH ENDS
pin_overall_length0.375 INCHES NOMINAL IN
pin_size_designation7/0
first_end_outer_radius0.250 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-187-3216
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TP07006SS · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: ROUND
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
•
PIN OVERALL LENGTH: 0.375 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SIZE DESIGNATION: 7/0
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SHEAR STRENGTH: 70000 SINGLE POUNDS PER SQUARE INCH
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FIRST END LOCATIONBOTH ENDS
FIRST END STYLEROUND
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
PIN OVERALL LENGTH0.375 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SIZE DESIGNATION7/0
SURFACE TREATMENTPASSIVATE OVERALL
SHEAR STRENGTH70000 SINGLE POUNDS PER SQUARE INCH
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP B1112 OR STEEL COMP B1113 OR STEEL COMP 1137 OVERALL
FIRST END OUTER RADIUS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 9
1689Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
38180-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
F114-70-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
GPB062-6SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5-737Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
118293Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy TP07006SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TP07006SS?
TP07006SS is a PIN,TAPERED,PLAIN.
What parts can replace TP07006SS?
There are 9 known substitutes for TP07006SS: 1689, 38180-6, F114-70-6 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TP07006SS?
TP07006SS is cataloged in the U.S. Government catalog under NSN 5315-00-187-3216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TP07006SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.