PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F114-70-6

F114-70-6 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP 303 OVERALL, shear_strength: 70000 SINGLE POUNDS PER SQUARE INCH, first_end_style: OVAL, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: PASSIVATE OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the Federal Logistics Information System under NSN 5315-00-187-3216, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F114-70-6
NSN: 5315-00-187-3216
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
shear_strength70000 SINGLE POUNDS PER SQUARE INCH
first_end_styleOVAL
hardness_rating25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentPASSIVATE OVERALL
first_end_locationBOTH ENDS
pin_overall_length0.375 INCHES NOMINAL IN
pin_size_designation7/0
first_end_outer_radius0.062 INCHES NOMINAL IN
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-187-3216
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F114-70-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.375 INCHES NOMINAL IN
•
PIN SIZE DESIGNATION: 7/0
•
FIRST END STYLE: ROUND
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP B1112 OR STEEL COMP B1113 OR STEEL COMP 1137 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SHEAR STRENGTH: 70000 SINGLE POUNDS PER SQUARE INCH
•
FIRST END OUTER RADIUS: 0.250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
PIN OVERALL LENGTH0.375 INCHES NOMINAL IN
PIN SIZE DESIGNATION7/0
FIRST END STYLEROUND
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP B1112 OR STEEL COMP B1113 OR STEEL COMP 1137 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SHEAR STRENGTH70000 SINGLE POUNDS PER SQUARE INCH
FIRST END OUTER RADIUS0.250 INCHES NOMINAL IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
8251091InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3055InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1689InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1452InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10070635-102InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
121200DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F114-70-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F114-70-6?
F114-70-6 is a PIN,TAPERED,PLAIN.
What parts can replace F114-70-6?
There are 26 known substitutes for F114-70-6: 8251091, 3055, 1689 and 23 more. Substitute compatibility should be verified for your specific system.
Is F114-70-6 still available?
F114-70-6 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F114-70-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026