PartsTable
Technical Data Sheet
TL10184-102 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOOK,LATCH,AIRCRAFT is a the manufacturer industrial component. Key specifications include height: 2.7000 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 1.0800 INCHES NOMINAL IN, overall_length: 1.7000 INCHES NOMINAL IN, mounting_facility: MOUNTING SLOTS, material_thickness: 0.3500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-411-8678, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL10184-102
NSN: 5340-01-411-8678
FSC: 5340
CAGE: 0CBU7 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV RAM PRODUCTS (USA)
SPECIFICATIONS
height2.7000 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width1.0800 INCHES NOMINAL IN
overall_length1.7000 INCHES NOMINAL IN
mounting_facilityMOUNTING SLOTS
material_thickness0.3500 INCHES NOMINAL IN
end_item_identificationC-17A ACFT A
material_document_and_classificationUNABLE TO DECODE
part_name_assigned_by_controlling_agencyKEEPER-HOOK LATCH
NSN5340-01-411-8678
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TL10184-102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
MATERIAL THICKNESS: 0.3500 INCHES NOMINAL IN
HEIGHT: 2.7000 INCHES NOMINAL IN
MOUNTING FACILITY: MOUNTING SLOTS
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MATERIAL THICKNESS0.3500 INCHES NOMINAL IN
OVERALL LENGTH1.7000 INCHES NOMINAL IN
HEIGHT2.7000 INCHES NOMINAL IN
MOUNTING FACILITYMOUNTING SLOTS
OVERALL WIDTH1.0800 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
502120Interchangeable
interchangeable cross-reference
interchangeable
9798Interchangeable
interchangeable cross-reference
interchangeable
17B2A3825-1Interchangeable
interchangeable cross-reference
interchangeable
9D0151-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TL10184-102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL10184-102?
TL10184-102 is a HOOK,LATCH,AIRCRAFT.
What parts can replace TL10184-102?
There are 4 known substitutes for TL10184-102: 502120, 9798, 17B2A3825-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TL10184-102?
TL10184-102 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-411-8678. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL10184-102