PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9D0151-1
9D0151-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 2.7000 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_width: 1.0800 INCHES NOMINAL IN, overall_length: 1.7000 INCHES NOMINAL IN, mounting_facility: MOUNTING SLOTS, material_thickness: 0.3500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-411-8678, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9D0151-1
NSN: 5340-01-411-8678
FSC: 5340
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
height2.7000 INCHES NOMINAL IN
materialUNABLE TO DECODE
overall_width1.0800 INCHES NOMINAL IN
overall_length1.7000 INCHES NOMINAL IN
mounting_facilityMOUNTING SLOTS
material_thickness0.3500 INCHES NOMINAL IN
material_document_and_classificationUNABLE TO DECODE
NSN5340-01-411-8678
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9D0151-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MATERIAL THICKNESS: 0.3500 INCHES NOMINAL IN
•
HEIGHT: 2.7000 INCHES NOMINAL IN
•
MOUNTING FACILITY: MOUNTING SLOTS
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MATERIAL THICKNESS0.3500 INCHES NOMINAL IN
OVERALL LENGTH1.7000 INCHES NOMINAL IN
HEIGHT2.7000 INCHES NOMINAL IN
MOUNTING FACILITYMOUNTING SLOTS
OVERALL WIDTH1.0800 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
502120Interchangeable
interchangeable cross-reference
interchangeable
9798Interchangeable
interchangeable cross-reference
interchangeable
17B2A3825-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9D0151-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9D0151-1?
9D0151-1 is a STRIKE,CATCH.
What parts can replace 9D0151-1?
There are 3 known substitutes for 9D0151-1: 502120, 9798, 17B2A3825-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 9D0151-1?
9D0151-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-411-8678. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9D0151-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026