PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TL-1610-1 7/16

TL-1610-1 7/16 — Technical Data Sheet

✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The BUSHING,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: IRON, split_width: 0.040 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, inside_diameter: 1.438 INCHES NOMINAL IN, surface_treatment: ENAMEL, taper_included_angle: 4 DEGREES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-01-548-2242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL-1610-1 7/16
NSN: 5365-01-548-2242
FSC: 5365
CAGE: 76474 — EMERSON POWER TRANSMISSION CORPORATION DIV EPT (USA)
SPECIFICATIONS
materialIRON
split_width0.040 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
inside_diameter1.438 INCHES NOMINAL IN
surface_treatmentENAMEL
taper_included_angle4 DEGREES
tapered_portion_length1.000 INCHES NOMINAL IN
end_item_identificationUSED ON MEGGITT AERIAL GUNNERY TARGET SYSTEM AGS-36/A/A37-U-36
large_end_outside_diameter2.250 INCHES NOMINAL IN
NSN5365-01-548-2242
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BUSHING,TAPERED TITLE COMPONENT PN TL-1610-1 7/16 MFR BUSHING,TAPERED
KEY FEATURES
•
LARGE END OUTSIDE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: IRON
•
INSIDE DIAMETER: 1.438 INCHES NOMINAL IN
•
TAPERED PORTION LENGTH: 1.000 INCHES NOMINAL IN
•
SPLIT WIDTH: 0.040 INCHES NOMINAL IN
•
TAPER INCLUDED ANGLE: 4 DEGREES
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
LARGE END OUTSIDE DIAMETER2.250 INCHES NOMINAL IN
MATERIALIRON
INSIDE DIAMETER1.438 INCHES NOMINAL IN
TAPERED PORTION LENGTH1.000 INCHES NOMINAL IN
SPLIT WIDTH0.040 INCHES NOMINAL IN
TAPER INCLUDED ANGLE4 DEGREES
END ITEM IDENTIFICATIONUSED ON MEGGITT AERIAL GUNNERY TARGET SYSTEM AGS-36/A/A37-U-36
OVERALL LENGTH1.000 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
402591Interchangeable
interchangeable cross-reference
interchangeable
G22Interchangeable
interchangeable cross-reference
interchangeable
1610-1-7-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TL-1610-1 7/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL-1610-1 7/16?
TL-1610-1 7/16 is a BUSHING,TAPERED.
What parts can replace TL-1610-1 7/16?
There are 3 known substitutes for TL-1610-1 7/16: 402591, G22, 1610-1-7-16. Substitute compatibility should be verified for your specific system.
What is the NSN for TL-1610-1 7/16?
TL-1610-1 7/16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-01-548-2242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL-1610-1 7/16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026