PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G22
G22 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include shape: STRAIGHT, width: 0.750 INCHES NOMINAL IN, length: 1.500 INCHES NOMINAL IN, swivel: NOT INCLUDED, diameter: 0.250 INCHES NOMINAL IN, material: STEEL BASIC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-7301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G22
NSN: 5330-00-078-7301
FSC: 5330
CAGE: 12183 — HALPRIN SUPPLY CO (USA)
SPECIFICATIONS
shapeSTRAIGHT
width0.750 INCHES NOMINAL IN
length1.500 INCHES NOMINAL IN
swivelNOT INCLUDED
diameter0.250 INCHES NOMINAL IN
materialSTEEL BASIC
thickness1.00 MILLIMETERS NOMINAL MM
top_styleFLAT
body_styleRECTANGULAR COMMUTATOR
body_length2.812 INCHES NOMINAL IN
design_typeSTRAIGHT
spline_width0.9008 INCHES MINIMUM AND 0.9038 INCHES MAXIMUM IN
NSN5330-00-078-7301
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: G22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 4.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 5.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER4.062 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER5.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
G22Interchangeable
interchangeable cross-reference
interchangeable
W596Interchangeable
interchangeable cross-reference
interchangeable
7358630Interchangeable
interchangeable cross-reference
interchangeable
GF27Interchangeable
interchangeable cross-reference
interchangeable
BF879Interchangeable
interchangeable cross-reference
interchangeable
40259-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G22?
G22 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace G22?
There are 8 known substitutes for G22: G22, W596, 7358630 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G22?
G22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-7301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026