PartsTable
Technical Data Sheet
Download PDF

TI440 — INSERT,SCREW THREAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

TI440: INSERT,SCREW THREAD.

The INSERT,SCREW THREAD is a the manufacturer industrial component. Key specifications include length: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: ALUMINUM ALLOY OVERALL, insert_size: 0.166 IN. MIN,0.171 IN.

MAX OUTSIDE DIAMETER IN, thread_class: 2B, special_features: COARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED, style_designator: BLIND. This part is cataloged in the U.S. Government catalog under NSN 5325-00-432-4655, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TI440
NSN: 5325-00-432-4655
NIINs: 004324655, 010537195
FSC: 5325 — Fastening Devices
CAGE: 03171 — E P D INDUSTRIES INC MELRU PLASTIC DIV (USA)
SPECIFICATIONS
length0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialALUMINUM ALLOY OVERALL
insert_size0.166 IN. MIN,0.171 IN. MAX OUTSIDE DIAMETER IN
thread_class2B
special_featuresCOARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED
style_designatorBLIND
surface_treatmentANODIZE OVERALL
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5325-00-432-4655
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: TI440 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
INSERT SIZE: 0.169 IN. NOM DIA IN
•
STYLE DESIGNATOR: BLIND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 40
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
LENGTH0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
INSERT SIZE0.169 IN. NOM DIA IN
STYLE DESIGNATORBLIND
NOMINAL THREAD SIZE0.112 INCHES IN
SPECIAL FEATURESCOARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED
THREAD CLASS2B
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 2
373276-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
440A5-8SSReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TI440?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TI440?
TI440 is a INSERT,SCREW THREAD.
What parts can replace TI440?
There are 2 known substitutes for TI440: 373276-2, 440A5-8SS. Substitute compatibility should be verified for your specific system.
What is the NSN for TI440?
TI440 is cataloged in the U.S. Government catalog under NSN 5325-00-432-4655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TI440