PartsTable
Technical Data Sheet
Download PDF

440A5-8SS — INSERT,SCREW THREAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

440A5-8SS: INSERT,SCREW THREAD.

The INSERT,SCREW THREAD is a the manufacturer industrial component. Key specifications include length: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, insert_size: 0.169 IN. NOM DIA IN, thread_class: 2B, special_features: COARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED, style_designator: BLIND, nominal_thread_size: 0.112 INCHES IN.

This part is cataloged in the U.S. Government catalog under NSN 5325-00-432-4655, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
440A5-8SS
NSN: 5325-00-432-4655
FSC: 5325 — Fastening Devices
CAGE: 07514 — YARDLEY PRODUCTS CORP SUB OF PREDCO INC (USA)
SPECIFICATIONS
length0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
insert_size0.169 IN. NOM DIA IN
thread_class2B
special_featuresCOARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED
style_designatorBLIND
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5325-00-432-4655
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 440A5-8SS · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
INSERT SIZE: 0.169 IN. NOM DIA IN
•
STYLE DESIGNATOR: BLIND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 40
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
LENGTH0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
INSERT SIZE0.169 IN. NOM DIA IN
STYLE DESIGNATORBLIND
NOMINAL THREAD SIZE0.112 INCHES IN
SPECIAL FEATURESCOARSE DIAMOND KNURL ON OD,BLIND END CHAMFERED
THREAD CLASS2B
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 2
TI440Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
373276-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 440A5-8SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 440A5-8SS?
440A5-8SS is a INSERT,SCREW THREAD.
What parts can replace 440A5-8SS?
There are 2 known substitutes for 440A5-8SS: TI440, 373276-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 440A5-8SS?
440A5-8SS is cataloged in the U.S. Government catalog under NSN 5325-00-432-4655. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 440A5-8SS