PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TC1038
TC1038 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-535-6466, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TC1038
NSN: 5340-00-535-6466
FSC: 5340
CAGE: 30040 — TELECTRO SYSTEMS CORP
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.811 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.623 INCHES NOMINAL IN
NSN5340-00-535-6466
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TC1038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.375 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALSTEEL BAND
SURFACE TREATMENTCADMIUM BAND
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
DISTANCE FROM LOOP CENTER TO TONGUE END0.811 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
5340PL1524825Upgraded Successor
successor cross-reference
successor
MS21106-16Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
AS21919WG40Upgraded Successor
successor cross-reference
successor
5340PL1653549Upgraded Successor
successor cross-reference
successor
MS21919WG40Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TC1038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TC1038?
TC1038 is a CLAMP,LOOP.
What parts can replace TC1038?
There are 22 known substitutes for TC1038: 5340PL1524825, MS21106-16, MIL-DTL-8603 and 19 more. Substitute compatibility should be verified for your specific system.
Is TC1038 still available?
TC1038 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TC1038

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026