PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1524825
5340PL1524825 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 OR STEEL COMP 348 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: PASSIVATE BAND, material_thickness: 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-4749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1524825
NSN: 5340-00-001-4749
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 OR STEEL COMP 348 OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentPASSIVATE BAND
material_thickness0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
loop_inside_diameter1.000 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.169 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole0.951 INCHES NOMINAL IN
NSN5340-00-001-4749
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1524825 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 321 OR STEEL COMP 347 CUSHION
•
MATERIAL THICKNESS: 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.951 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 321 OR STEEL COMP 347 CUSHION
MATERIAL THICKNESS0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
DIAMETER0.204 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
MATERIALSTEEL COMP 321 OR STEEL COMP 348 OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.951 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1524825?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1524825?
5340PL1524825 is a CLAMP,LOOP.
What parts can replace 5340PL1524825?
There are 23 known substitutes for 5340PL1524825: MILC8603, 99122, MS21919G8 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1524825?
5340PL1524825 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-4749. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1524825

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026