PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA716H4A
TA716H4A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ASBESTOS AND PLASTIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: PTFE IMPREGNATED PBI- POLYAMIDE GLASS BLEND FABRIC, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-082-1779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA716H4A
NSN: 5340-00-082-1779
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialASBESTOS AND PLASTIC CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresPTFE IMPREGNATED PBI- POLYAMIDE GLASS BLEND FABRIC
style_designatorOFFSET MOUNT
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.745 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP
center_to_center_distance_between_loop_and_mounting_hole0.527 INCHES NOMINAL IN
NSN5340-00-082-1779
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA716H4A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE BAND
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.745 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
DIAMETER0.204 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.745 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALASBESTOS AND PLASTIC CUSHION
STYLE DESIGNATOROFFSET MOUNT
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
TA716H4AUpgraded Successor
successor cross-reference
successor
211-536-9104Upgraded Successor
successor cross-reference
successor
M83248/2-904Interchangeable
interchangeable cross-reference
interchangeable
M83248/-904Interchangeable
interchangeable cross-reference
interchangeable
431385 ITEM 41Interchangeable
interchangeable cross-reference
interchangeable
855338Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA716H4A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA716H4A?
TA716H4A is a CLAMP,LOOP.
What parts can replace TA716H4A?
There are 11 known substitutes for TA716H4A: TA716H4A, 211-536-9104, M83248/2-904 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA716H4A?
TA716H4A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-082-1779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA716H4A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026