PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-904
M83248/2-904 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-904 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5172, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-904
NSN: 5331-00-167-5172
FSC: 5331 — O-RING
CAGE: 1K697 — DBR INDUSTRIES, INC. DBA DBR INDUSTRIES INC (USA)
SPECIFICATIONS
Part NumberM83248/2-904
NSN5331-00-167-5172
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-904 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.344 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.344 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
5331PL2007478Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-904Interchangeable
interchangeable cross-reference
interchangeable
379643Interchangeable
interchangeable cross-reference
interchangeable
ABS3303Interchangeable
interchangeable cross-reference
interchangeable
205-160-904Interchangeable
interchangeable cross-reference
interchangeable
1KK528Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-904?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-904?
M83248/2-904 is a M83248/2-904.
What parts can replace M83248/2-904?
There are 34 known substitutes for M83248/2-904: 5331PL2007478, M83248-1-904, 379643 and 31 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-904 still available?
M83248/2-904 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-904

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026