TA4C76WD14X — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TA4C76WD14X: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-256-7342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TA4C76WD14X

NSN: 5340-00-256-7342
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.050 INCHES NOMINAL IN
loop_inside_diameter	0.875 INCHES NOMINAL IN
material_document_and_classification	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.126 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.908 INCHES NOMINAL IN
NSN	5340-00-256-7342

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.126 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.908 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.126 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.908 INCHES NOMINAL IN
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
MATERIAL	ALUMINUM ALLOY 2024 BAND

SUBSTITUTES & CROSS-REFERENCES 7

5340PL1866824Reference document

Same NSN cross-reference

Reference document — Informative reference only

5340PL0729428Reference document

Same NSN cross-reference

Reference document — Informative reference only

385-14Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS21122-14Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1715Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

C2037-14Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy TA4C76WD14X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TA4C76WD14X?

TA4C76WD14X is a CLAMP,LOOP.

What parts can replace TA4C76WD14X?

There are 7 known substitutes for TA4C76WD14X: 5340PL1866824, 5340PL0729428, 385-14 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for TA4C76WD14X?

TA4C76WD14X is cataloged in the U.S. Government catalog under NSN 5340-00-256-7342. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TA4C76WD14X — CLAMP,LOOP

Request a Quote — TA4C76WD14X