T93-64 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

T93-64: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, material: STEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL, head_style: BEVEL, chamfer_length: 0.016 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-215-7317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

T93-64

NSN: 5315-00-215-7317
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79410 — LIBERTY VENTURES INTI, LLC (USA)

SPECIFICATIONS

height	0.125 INCHES NOMINAL IN
diameter	0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
material	STEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL
head_style	BEVEL
chamfer_length	0.016 INCHES NOMINAL IN
style_designator	STRAIGHT
pin_chamfer_angle	45.0 DEGREES NOMINAL
pin_head_diameter	0.281 INCHES NOMINAL IN
under_head_length	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
first_hole_diameter	0.016 INCHES NOMINAL IN
NSN	5315-00-215-7317

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.016 INCHES NOMINAL IN

•

UNDER HEAD LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.016 INCHES NOMINAL IN

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.281 INCHES NOMINAL IN

•

DIAMETER: 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN

•

HEAD STYLE: BEVEL

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.016 INCHES NOMINAL IN
UNDER HEAD LENGTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.016 INCHES NOMINAL IN
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.281 INCHES NOMINAL IN
DIAMETER	0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
HEAD STYLE	BEVEL
HEIGHT	0.125 INCHES NOMINAL IN
MATERIAL	STEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL

SUBSTITUTES & CROSS-REFERENCES 4

P18222Reference document

Same NSN cross-reference

Reference document — Secondary reference

CE201052Reference document

Same NSN cross-reference

Reference document — Secondary reference

1052Reference document

Same NSN cross-reference

Reference document — Secondary reference

201052Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy T93-64?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is T93-64?

T93-64 is a PIN,STRAIGHT,HEADED.

What parts can replace T93-64?

There are 4 known substitutes for T93-64: P18222, CE201052, 1052 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for T93-64?

T93-64 is cataloged in the U.S. Government catalog under NSN 5315-00-215-7317. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

T93-64 — PIN,STRAIGHT,HEADED

Request a Quote — T93-64