PartsTable
Technical Data Sheet
Download PDF

P18222 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

P18222: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, diameter: 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, material: STEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL, head_style: BEVEL, chamfer_length: 0.016 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-215-7317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P18222
NSN: 5315-00-215-7317
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59690 — KOEHRING CO LORAIN DIV (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
diameter0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
materialSTEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL
head_styleBEVEL
chamfer_length0.016 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.281 INCHES NOMINAL IN
under_head_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
first_hole_diameter0.016 INCHES NOMINAL IN
NSN5315-00-215-7317
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P18222 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.016 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.016 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.281 INCHES NOMINAL IN
•
DIAMETER: 0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
HEAD STYLE: BEVEL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.016 INCHES NOMINAL IN
UNDER HEAD LENGTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.016 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.281 INCHES NOMINAL IN
DIAMETER0.180 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
HEAD STYLEBEVEL
HEIGHT0.125 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 OR STEEL COMP 1115 OR STEEL COMP 1120 OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
CE201052Reference document
Same NSN cross-reference
Reference document — Secondary reference
1052Reference document
Same NSN cross-reference
Reference document — Secondary reference
201052Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
T93-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy P18222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P18222?
P18222 is a PIN,STRAIGHT,HEADED.
What parts can replace P18222?
There are 4 known substitutes for P18222: CE201052, 1052, 201052 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P18222?
P18222 is cataloged in the U.S. Government catalog under NSN 5315-00-215-7317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P18222

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.