PartsTable
Technical Data Sheet
Download PDF

T7610102 — SNAP HOOK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

T7610102: SNAP HOOK.

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON CONNECTION END, design_type: SWIVEL, inside_width: 0.3125 INCHES NOMINAL IN, inside_length: 1.000 INCHES NOMINAL IN, overall_length: 3.125 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-286-2474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T7610102
NSN: 5340-00-286-2474
FSC: 5340 — Hardware, Commercial
CAGE: 96508 — APEX TOOL GROUP (USA)
SPECIFICATIONS
materialIRON CONNECTION END
design_typeSWIVEL
inside_width0.3125 INCHES NOMINAL IN
inside_length1.000 INCHES NOMINAL IN
overall_length3.125 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
special_featuresW/BARREL ROLLER
end_connection_styleLOOP
hook_style_designatorSLIDING BOLT
rubber_covered_featureNOT INCLUDED
NSN5340-00-286-2474
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T7610102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.3125 INCHES NOMINAL IN
•
UNATTACHED RING: NOT INCLUDED
•
INSIDE LENGTH: 1.000 INCHES NOMINAL IN
•
DESIGN TYPE: SWIVEL
•
END CONNECTION STYLE: LOOP
•
HOOK STYLE DESIGNATOR: SLIDING BOLT
TECHNICAL CHARACTERISTICS
INSIDE WIDTH0.3125 INCHES NOMINAL IN
UNATTACHED RINGNOT INCLUDED
INSIDE LENGTH1.000 INCHES NOMINAL IN
DESIGN TYPESWIVEL
OVERALL LENGTH3.125 INCHES NOMINAL IN
END CONNECTION STYLELOOP
HOOK STYLE DESIGNATORSLIDING BOLT
SPECIAL FEATURESW/BARREL ROLLER
MATERIALIRON CONNECTION END
MATERIALIRON HOOK
SUBSTITUTES & CROSS-REFERENCES 2
017-1/25Reference document
Same NSN cross-reference
Reference document — Secondary reference
760-0111Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy T7610102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T7610102?
T7610102 is a SNAP HOOK.
What parts can replace T7610102?
There are 2 known substitutes for T7610102: 017-1/25, 760-0111. Substitute compatibility should be verified for your specific system.
What is the NSN for T7610102?
T7610102 is cataloged in the U.S. Government catalog under NSN 5340-00-286-2474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T7610102