PartsTable
Technical Data Sheet

017-1/25 — GEARCASE-MOTOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

017-1/25: GEARCASE-MOTOR.

The GEARCASE-MOTOR is a the manufacturer industrial component. Key specifications include wheel_type: SOLID, wheel_diameter: 6.000 INCHES NOMINAL IN, effective_height: 7.500 INCHES NOMINAL IN, style_designator: SWIVEL OFFSET, features_provided: HEXAGON NUT, end_item_identification: 2330-01-387-5443. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-286-2474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
017-1/25
NSN: 5340-00-286-2474
NIINs: 002862474, 006434662, 016112350
FSC: 5340 — Hardware, Commercial
CAGE: 96508 — APEX TOOL GROUP (USA)
SPECIFICATIONS
wheel_typeSOLID
wheel_diameter6.000 INCHES NOMINAL IN
wheel_quantity1
effective_height7.500 INCHES NOMINAL IN
style_designatorSWIVEL OFFSET
features_providedHEXAGON NUT
end_item_identification2330-01-387-5443
NSN5340-00-286-2474
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 017-1/25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.3125 INCHES NOMINAL IN
•
UNATTACHED RING: NOT INCLUDED
•
INSIDE LENGTH: 1.000 INCHES NOMINAL IN
•
DESIGN TYPE: SWIVEL
•
END CONNECTION STYLE: LOOP
•
HOOK STYLE DESIGNATOR: SLIDING BOLT
TECHNICAL CHARACTERISTICS
INSIDE WIDTH0.3125 INCHES NOMINAL IN
UNATTACHED RINGNOT INCLUDED
INSIDE LENGTH1.000 INCHES NOMINAL IN
DESIGN TYPESWIVEL
OVERALL LENGTH3.125 INCHES NOMINAL IN
END CONNECTION STYLELOOP
HOOK STYLE DESIGNATORSLIDING BOLT
SPECIAL FEATURESW/BARREL ROLLER
MATERIALIRON CONNECTION END
MATERIALIRON HOOK
SUBSTITUTES & CROSS-REFERENCES 2
760-0111Reference document
Same NSN cross-reference
Reference document — Secondary reference
T7610102Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 017-1/25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 017-1/25?
017-1/25 is a GEARCASE-MOTOR.
What parts can replace 017-1/25?
There are 2 known substitutes for 017-1/25: 760-0111, T7610102. Substitute compatibility should be verified for your specific system.
What is the NSN for 017-1/25?
017-1/25 is cataloged in the U.S. Government catalog under NSN 5340-00-286-2474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 017-1/25