PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T6R4
T6R4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-282-7965, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T6R4
NSN: 5340-00-282-7965
FSC: 5340
CAGE: 79307 — WHITEHEAD METALS INC (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.359 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.747 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.529 INCHES NOMINAL IN
NSN5340-00-282-7965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T6R4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
146Upgraded Successor
successor cross-reference
successor
SCD4156PT4Upgraded Successor
successor cross-reference
successor
835Upgraded Successor
successor cross-reference
successor
238-5050-5Upgraded Successor
successor cross-reference
successor
T6R4Upgraded Successor
successor cross-reference
successor
64Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy T6R4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T6R4?
T6R4 is a CLAMP,LOOP.
What parts can replace T6R4?
There are 27 known substitutes for T6R4: 146, SCD4156PT4, 835 and 24 more. Substitute compatibility should be verified for your specific system.
Is T6R4 still available?
T6R4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T6R4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026