PartsTable / COMPONENT / 383064
383064
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.380 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.045 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-039-6171, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
383064
NSN: 5330-00-039-6171 FSC: 5330 CAGE: 72850 — PUROLATOR PRODUCTS CO DIV MOTOR COMPONENTS, LLC (USA)
SPECIFICATIONS
diameter 0.173 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.380 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.045 INCHES NOMINAL IN loop_inside_diameter 0.270 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.620 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.430 INCHES NOMINAL IN NSN 5330-00-039-6171
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 383064
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• HOLE DIAMETER: 0.343 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,G-3212 MIL SPEC ALL MATERIAL RESPONSES OVERALL G
• OUTSIDE CORNER RADIUS: 0.359 INCHES NOMINAL IN
• MATERIAL: PAPER AND GLUE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION HOLE DIAMETER 0.343 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803,G-3212 MIL SPEC ALL MATERIAL RESPONSES OVERALL G OUTSIDE CORNER RADIUS 0.359 INCHES NOMINAL IN OVERALL WIDTH 2.843 INCHES NOMINAL IN MATERIAL PAPER AND GLUE OVERALL OVERALL LENGTH 3.968 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
6515873 Interchangeable interchangeable cross-reference
interchangeable
47306-9 Interchangeable interchangeable cross-reference
interchangeable
NPC-4 Interchangeable interchangeable cross-reference
interchangeable
383064 Interchangeable interchangeable cross-reference
interchangeable
40870SERIES Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 383064?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 383064?
383064 is a GASKET.
What parts can replace 383064?
There are 8 known substitutes for 383064: 6515873, 47306-9, NPC-4 and 5 more. Substitute compatibility should be verified for your specific system.
Is 383064 still available?
383064 is currently cancelled.