PartsTable
Technical Data Sheet
PartsTable / COMPONENT / T14843
T14843 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 6.563 INCHES NOMINAL IN, overall_length: 10.500 INCHES NOMINAL IN, special_features: HOLE DIA AND QUANTITY: 0.437 IN. NOM 5,0.563 IN.

NOM 2,0.813 IN. NOM 1 IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-371-6746, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T14843
NSN: 5330-00-371-6746
FSC: 5330
CAGE: 95201 — NAPCO INTERNATIONAL LLC DBA NAPCO INTERNATIONAL INC (USA)
SPECIFICATIONS
overall_width6.563 INCHES NOMINAL IN
overall_length10.500 INCHES NOMINAL IN
special_featuresHOLE DIA AND QUANTITY: 0.437 IN. NOM 5,0.563 IN. NOM 2,0.813 IN. NOM 1 IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-371-6746
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: T14843 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH10.500 INCHES NOMINAL IN
OVERALL WIDTH6.563 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DIA AND QUANTITY: 0.437 IN. NOM 5,0.563 IN. NOM 2,0.813 IN. NOM 1 IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
14843Interchangeable
interchangeable cross-reference
interchangeable
67-305Interchangeable
interchangeable cross-reference
interchangeable
B107.13 TY3CL1STAInterchangeable
interchangeable cross-reference
interchangeable
654-6Interchangeable
interchangeable cross-reference
interchangeable
A733XS-73CFGInterchangeable
interchangeable cross-reference
interchangeable
9136638Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy T14843?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T14843?
T14843 is a GASKET.
What parts can replace T14843?
There are 18 known substitutes for T14843: 14843, 67-305, B107.13 TY3CL1STA and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for T14843?
T14843 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-371-6746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T14843

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026