PartsTable
Technical Data Sheet

14843 — Technical Data Sheet

✓ Verified by PartsTable
schleich · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Warthog from schleich® WILD LIFE has strange looking warts and curved tusks that are up to 30 cm long.<br><br>The Warthog from schleich® WILD LIFE is a mammal that lives in Africa and primarily eats roots, tubers and berries. It has wart-shaped growths under the eyes and above the nose. They aren't actually warts but rather particularly thick skin that protects the animal from serious injury during fights.

The tusks are used to defend against lions, hyenas, leopards and wild dogs. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-3675, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
14843
NSN: 5340-00-034-3675
FSC: 5340
CAGE: 99643 — EATON AEROSPACE LLC DBA EATON AEROSPACE JACKSON (USA)
SPECIFICATIONS
face_materialALUMINUM
special_featuresWITH SYNTHETIC RUBBER COVER
storage_temp_range+2.0 TO 8.0 CELSIUS DEGC
jaw_width_for_which_designed6.000 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyREAGENT DISC LIPID PANEL PLUS PICCOLO CHEMISTRY ANALYZER 10S
NSN5340-00-034-3675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14843 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD LENGTH: 0.083 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
MATERIAL: ALUMINUM ALLOY
VENT HOLE SHAPE: ROUND
VENT HOLE DIAMETER: 0.159 INCHES NOMINAL IN
VENT HOLE QUANTITY: 1
SURFACE TREATMENT: ANODIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.562-18 UNF
OUTSIDE DIAMETER: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.083 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY
VENT HOLE SHAPEROUND
VENT HOLE DIAMETER0.159 INCHES NOMINAL IN
VENT HOLE QUANTITY1
SURFACE TREATMENTANODIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.562-18 UNF
OUTSIDE DIAMETER0.875 INCHES NOMINAL IN
INSIDE DIAMETER0.497 INCHES NOMINAL IN
LENGTH0.937 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
T14843Interchangeable
interchangeable cross-reference
interchangeable
6546Interchangeable
interchangeable cross-reference
interchangeable
MH5000-100B6Interchangeable
interchangeable cross-reference
interchangeable
C765Interchangeable
interchangeable cross-reference
interchangeable
7071Interchangeable
interchangeable cross-reference
interchangeable
926-14843Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusMATURE
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14843?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14843?
14843 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by schleich.
What parts can replace 14843?
There are 14 known substitutes for 14843: T14843, 6546, MH5000-100B6 and 11 more. Substitute compatibility should be verified for your specific system.
Is 14843 still available?
14843 is currently MATURE.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14843