PartsTable
Technical Data Sheet
PartsTable / MRO / SV809020 ITEM 30

SV809020 ITEM 30 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include body_style: REAR PANEL MOUNTED TYPE, overall_width: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, overall_height: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, overall_length: 4.000 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN, resistor_rating: 330.0 KILOHMS, voltage_in_volts: 500.0. This part is cataloged in the Federal Logistics Information System under NSN 5920-00-824-1515, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ SV809020 ITEM 30
NSN: 5920-00-824-1515
FSC: 5920
CAGE: 81412 — TREADWELL CORPORATION (DELAWARE) DBA TREADWELL CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY
body_styleREAR PANEL MOUNTED TYPE
overall_width1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
overall_height1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
overall_length4.000 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
resistor_rating330.0 KILOHMS
voltage_in_volts500.0
surface_treatmentSILVER CONTACT
mounting_hole_styleBUSHING MOUNTING W/4 HOLES
bushing_hole_diameter1.135 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN
screw_thread_diameter0.164 INCHES NOMINAL IN
mounting_hole_diameter0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
NSN5920-00-824-1515
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available FUSEHOLDER,EXTRACTOR POST TITLE COMPONENT PN SV809020 ITEM 30 MFR FUSEHOLDER,EXTRACTOR P
KEY FEATURES
•
FUSE TERMINAL TYPE ACCOMMODATED: FERRULE
•
TEST DATA DOCUMENT: 81349-MIL-F-19207/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE: 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
•
SCREW THREAD DIAMETER: 0.164 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH: 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLE AND MOUNTING HOLE: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FUSE TERMINAL TYPE ACCOMMODATEDFERRULE
TEST DATA DOCUMENT81349-MIL-F-19207/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
SCREW THREAD DIAMETER0.164 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLE AND MOUNTING HOLE0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
OVERALL WIDTH1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
MOUNTING HOLE STYLEBUSHING MOUNTING W/4 HOLES
BODY STYLEREAR PANEL MOUNTED TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
1276-19-886InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FHL12UInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5920PL0829418InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4008632-7InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
HGCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
50031716InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SV809020 ITEM 30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SV809020 ITEM 30?
SV809020 ITEM 30 is a FUSEHOLDER,EXTRACTOR POST. It is classified as a MRO (MRO_GENERAL).
What parts can replace SV809020 ITEM 30?
There are 34 known substitutes for SV809020 ITEM 30: 1276-19-886, FHL12U, 5920PL0829418 and 31 more. Substitute compatibility should be verified for your specific system.
Is SV809020 ITEM 30 still available?
SV809020 ITEM 30 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SV809020 ITEM 30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026