PartsTable
Technical Data Sheet
PartsTable / MRO / 4008632-7
4008632-7 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include width: 0.390 INCHES NOMINAL IN, length: 4.600 INCHES NOMINAL IN, thickness: 0.125 INCHES NOMINAL IN, body_style: REAR PANEL MOUNTED TYPE, overall_width: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, overall_height: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-255-8780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4008632-7
NSN: 5340-00-255-8780
FSC: 5340
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
width0.390 INCHES NOMINAL IN
length4.600 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY
thickness0.125 INCHES NOMINAL IN
body_styleREAR PANEL MOUNTED TYPE
overall_width1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
overall_height1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
overall_length4.000 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
resistor_rating330.0 KILOHMS
voltage_in_volts500.0
surface_treatmentSILVER CONTACT
mounting_hole_styleBUSHING MOUNTING W/4 HOLES
NSN5340-00-255-8780
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4008632-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 4.600 INCHES NOMINAL IN
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHIONING
•
WIDTH: 0.390 INCHES NOMINAL IN
•
FSC APPLICATION DATA: COMPUTER,AIR DATA,FLIGHT INSTRUMENT
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH4.600 INCHES NOMINAL IN
THICKNESS0.125 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q CUSHIONING
WIDTH0.390 INCHES NOMINAL IN
FSC APPLICATION DATACOMPUTER,AIR DATA,FLIGHT INSTRUMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SV809020 ITEM 30Interchangeable
interchangeable cross-reference
interchangeable
FLH12UInterchangeable
interchangeable cross-reference
interchangeable
FHL12UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4008632-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4008632-7?
4008632-7 is a FUSEHOLDER,EXTRACTOR POST. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4008632-7?
There are 3 known substitutes for 4008632-7: SV809020 ITEM 30, FLH12U, FHL12U. Substitute compatibility should be verified for your specific system.
What is the NSN for 4008632-7?
4008632-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-255-8780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4008632-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026