PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SU-10
SU-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,THERMOSTATIC is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, body_height: 0.812 INCHES NOMINAL IN, hole_diameter: 0.750 INCHES MAXIMUM IN, terminal_type: TAB, SOLDER LUG, overall_height: 1.312 INCHES NOMINAL IN, mounting_method: CLAMP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-468-0174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SU-10
NSN: 5340-00-468-0174
FSC: 5340
CAGE: 37239 — LUNKENHEIMER CO (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
body_height0.812 INCHES NOMINAL IN
hole_diameter0.750 INCHES MAXIMUM IN
terminal_typeTAB, SOLDER LUG
overall_height1.312 INCHES NOMINAL IN
mounting_methodCLAMP
outside_diameter0.735 INCHES MAXIMUM IN
overall_diameter1.250 INCHES NOMINAL IN
special_featuresWASHERS ARE CURVED
style_designatorDISC
frequency_in_hertz60.0 AND 400.0 SECOND VOLTAGE
contact_adjustabilityDEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE
NSN5340-00-468-0174
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SU-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SU10EPInterchangeable
interchangeable cross-reference
interchangeable
SU-10Interchangeable
interchangeable cross-reference
interchangeable
20569Interchangeable
interchangeable cross-reference
interchangeable
N20569Interchangeable
interchangeable cross-reference
interchangeable
19200N PIECE 3Interchangeable
interchangeable cross-reference
interchangeable
214-040-931-101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SU-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SU-10?
SU-10 is a SWITCH,THERMOSTATIC.
What parts can replace SU-10?
There are 10 known substitutes for SU-10: SU10EP, SU-10, 20569 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SU-10?
SU-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-468-0174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SU-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026