PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214-040-931-101
214-040-931-101 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN, overall_width: 0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-256-7201, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214-040-931-101
NSN: 3110-01-256-7201
FSC: 3110
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_shapeSTRAIGHT
bore_diameter0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN
overall_width0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter2.0468 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
material_document_and_classificationAMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-256-7201
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 214-040-931-101 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BORE DIAMETER: 0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
OVERALL OUTSIDE DIAMETER: 2.0468 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIALSTEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
BORE DIAMETER0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER2.0468 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
OVERALL WIDTH0.4674 INCHES MINIMUM AND 0.4724 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
SV-10Interchangeable
interchangeable cross-reference
interchangeable
20-569Interchangeable
interchangeable cross-reference
interchangeable
1226 1-2IN250PSIBR0NZEInterchangeable
interchangeable cross-reference
interchangeable
N20569Interchangeable
interchangeable cross-reference
interchangeable
19200N PIECE 3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214-040-931-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-040-931-101?
214-040-931-101 is a BEARING,BALL,ANNULAR.
What parts can replace 214-040-931-101?
There are 5 known substitutes for 214-040-931-101: SV-10, 20-569, 1226 1-2IN250PSIBR0NZE and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 214-040-931-101?
214-040-931-101 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-256-7201. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-040-931-101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026