The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, overall_height: 0.137 INCHES MAXIMUM IN, overall_length: 1.279 INCHES MAXIMUM IN, style_designator: ANCHOR, material_thickness: 0.040 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-721-1126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ST9M589-4
NSN:5340-01-721-1126 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING
overall_width
0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
overall_height
0.137 INCHES MAXIMUM IN
overall_length
1.279 INCHES MAXIMUM IN
style_designator
ANCHOR
material_thickness
0.040 INCHES MAXIMUM IN
mounting_hole_diameter
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
end_item_identification
F-15EX
width_between_cup_flats
0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
specification/standard_data
76301-ST9-589 MANUFACTURERS SOURCE CONTROL
material_document_and_classification
AMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
NSN
5340-01-721-1126
COMPONENT DIAGRAM
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.137 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
STYLE DESIGNATOR
ANCHOR
MATERIAL DOCUMENT AND CLASSIFICATION
AMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
OVERALL LENGTH
1.279 INCHES MAXIMUM IN
OVERALL WIDTH
0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.040 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA
76301-ST9-589 MANUFACTURERS SOURCE CONTROL
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M589-4?
ST9M589-4 is a RETAINER,NUT AND BOLT.
What parts can replace ST9M589-4?
There is 1 known substitute for ST9M589-4: NS202135-048. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M589-4?
ST9M589-4 is cataloged in the U.S. Government catalog under NSN 5340-01-721-1126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.