PartsTable
Technical Data Sheet
Download PDF

NS202135-048 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NS202135-048: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, overall_height: 0.137 INCHES MAXIMUM IN, overall_length: 1.279 INCHES MAXIMUM IN, style_designator: ANCHOR, material_thickness: 0.040 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-721-1126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NS202135-048
NSN: 5340-01-721-1126
FSC: 5340 — Hardware, Commercial
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
overall_height0.137 INCHES MAXIMUM IN
overall_length1.279 INCHES MAXIMUM IN
style_designatorANCHOR
material_thickness0.040 INCHES MAXIMUM IN
mounting_hole_diameter0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
end_item_identificationF-15EX
width_between_cup_flats0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
specification/standard_data76301-ST9-589 MANUFACTURERS SOURCE CONTROL
material_document_and_classificationAMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
NSN5340-01-721-1126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NS202135-048 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.137 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5525, AMS5732 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
OVERALL LENGTH1.279 INCHES MAXIMUM IN
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA76301-ST9-589 MANUFACTURERS SOURCE CONTROL
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NS202135-048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NS202135-048?
NS202135-048 is a RETAINER,NUT AND BOLT.
What is the NSN for NS202135-048?
NS202135-048 is cataloged in the U.S. Government catalog under NSN 5340-01-721-1126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NS202135-048

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.