PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSR6X3A
SSR6X3A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.3750 INCHES NOMINAL IN, overall_width: 0.2188 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-679-6786, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSR6X3A
NSN: 3110-00-679-6786
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.3750 INCHES NOMINAL IN
overall_width0.2188 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.8750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-00-679-6786
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSR6X3A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3750 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3750 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
OVERALL WIDTH0.2188 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.3
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
700026Interchangeable
interchangeable cross-reference
interchangeable
1-210761-3Interchangeable
interchangeable cross-reference
interchangeable
30111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSR6X3A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSR6X3A?
SSR6X3A is a BEARING,BALL,ANNULAR.
What parts can replace SSR6X3A?
There are 31 known substitutes for SSR6X3A: FF-B-2844, 3TAR17-24U, 5189342 and 28 more. Substitute compatibility should be verified for your specific system.
Is SSR6X3A still available?
SSR6X3A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSR6X3A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026