PartsTable
Technical Data Sheet
Download PDF

5189342 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5189342: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_shape: STRAIGHT, bore_diameter: 1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-008-7874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5189342
NSN: 3110-00-008-7874
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_shapeSTRAIGHT
bore_diameter1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MINIMUM
overall_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
NSN3110-00-008-7874
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5189342 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MINIMUM
LOAD DIRECTIONANGULAR
BORE DIAMETER1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OUTER RING
MATERIALSTEEL CORROSION RESISTING INNER RING
SUBSTITUTES & CROSS-REFERENCES 1
FF-B-2844Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5189342?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5189342?
5189342 is a BEARING,BALL,ANNULAR.
What parts can replace 5189342?
There is 1 known substitute for 5189342: FF-B-2844. Substitute compatibility should be verified for your specific system.
What is the NSN for 5189342?
5189342 is cataloged in the U.S. Government catalog under NSN 3110-00-008-7874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5189342