PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSR10XR1
SSR10XR1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.6250 INCHES NOMINAL IN, overall_width: 0.2812 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0844, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSR10XR1
NSN: 3110-00-277-0844
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.6250 INCHES NOMINAL IN
overall_width0.2812 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.3750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-277-0844
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSR10XR1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.6250 INCHES NOMINAL IN
OVERALL WIDTH0.2812 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL CORROSION RESISTING OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
1-210761-3Interchangeable
interchangeable cross-reference
interchangeable
30111Interchangeable
interchangeable cross-reference
interchangeable
W5939092PC24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSR10XR1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSR10XR1?
SSR10XR1 is a BEARING,BALL,ANNULAR.
What parts can replace SSR10XR1?
There are 34 known substitutes for SSR10XR1: FF-B-2844, 3TAR17-24U, 5189342 and 31 more. Substitute compatibility should be verified for your specific system.
Is SSR10XR1 still available?
SSR10XR1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSR10XR1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026