PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS-6-T
SS-6-T ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The POWER STRIP,ELECTRICAL OUTLET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, outlet_type: SWITCHED, overall_width: 4.000 INCHES NOMINAL IN, alignment_type: RIGID, overall_height: 2.000 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS-6-T
NSN: 3110-00-293-8968
FSC: 3110
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
outlet_typeSWITCHED
overall_width4.000 INCHES NOMINAL IN
alignment_typeRIGID
overall_height2.000 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
surface_finishGROUND
special_featuresPOWER STRIP HAS A 6 FT POWER CORD ATTACHED AND OFFERS TWO RJ-11 JACKS FOR PHONE LINE PROTECTION AND HARD DISK PROTECTION FT
style_designatorGROOVED RACE SURFACE
features_providedHIGH INRUSH PROTECTION
mating_end_quantity4
bore_smallest_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
NSN3110-00-293-8968
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SS-6-T · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONABEC NO.3
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
OVERALL HEIGHT0.1480 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
OVERALL OUTSIDE DIAMETER0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10764Interchangeable
interchangeable cross-reference
interchangeable
3/8 MMO-SInterchangeable
interchangeable cross-reference
interchangeable
6-6-6 140438CInterchangeable
interchangeable cross-reference
interchangeable
2645761Interchangeable
interchangeable cross-reference
interchangeable
S6TInterchangeable
interchangeable cross-reference
interchangeable
SS-6-TInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS-6-T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS-6-T?
SS-6-T is a POWER STRIP,ELECTRICAL OUTLET.
What parts can replace SS-6-T?
There are 9 known substitutes for SS-6-T: 10764, 3/8 MMO-S, 6-6-6 140438C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS-6-T?
SS-6-T is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS-6-T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026