PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2645761
2645761 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, alignment_type: RIGID, overall_height: 0.1480 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN, surface_finish: GROUND, largest_bore_diameter: 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM IN, bore_smallest_diameter: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-180-7776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2645761
NSN: 3110-00-180-7776
FSC: 3110
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
alignment_typeRIGID
overall_height0.1480 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
surface_finishGROUND
largest_bore_diameter0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM IN
bore_smallest_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
largest_outside_diameter0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
smallest_outside_diameter0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
retainer_fabrication_methodSTAMPED
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-180-7776
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2645761 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SMALLEST OUTSIDE DIAMETER: 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
•
RETAINER FABRICATION METHOD: STAMPED
•
LARGEST BORE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL CORROSION RESISTING OVERALL
OVERALL HEIGHT0.1480 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SMALLEST OUTSIDE DIAMETER0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
RETAINER FABRICATION METHODSTAMPED
LARGEST BORE DIAMETER0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
10764Interchangeable
interchangeable cross-reference
interchangeable
3/8 MMO-SInterchangeable
interchangeable cross-reference
interchangeable
6-6-6 140438CInterchangeable
interchangeable cross-reference
interchangeable
414528-4Interchangeable
interchangeable cross-reference
interchangeable
450-5169Interchangeable
interchangeable cross-reference
interchangeable
710410-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2645761?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2645761?
2645761 is a BEARING,BALL,THRUST.
What parts can replace 2645761?
There are 7 known substitutes for 2645761: 10764, 3/8 MMO-S, 6-6-6 140438C and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2645761?
2645761 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-180-7776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2645761

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026